For part 3 of the T56 magnum swap project we will be installing the bellhousing on the block, doing the quick mod to the tunnel, installing the transmission onto the bellhousing, and then installing the crossmember.
This is a very quick install, but the video will show you all the specifics as far as bolt locations and things to use caution on during the install process.
The only remaining steps are bleeding the clutch, installing the driveshaft, and adding fluid to the transmission. I am also going to cover electronics and how to convert the T56 Speed sensor over so that it will work with your stock speedometer. That will all be part of the 4th and final installment of this transmission swap project.