Compressed Air Supercharger Kit - 1/8 mile
Eighth Mile CAS Kits
1500 HP
- One Bottle with valve
- Regulator (1 inlet / 1 outlet)
- One Lockoff Valve
- 1 EPR (dbw) Valve
- 3.5" Ejector
- One Ejector Inlet Fitting
- One 12AN Union
- One 20AN Union
2000 HP
- Two Bottles with valves
- Regulator (1 inlet / 1 outlet)
- One Lockoff Valve
- One EPR (dbw) Valve
- 3.5" Ejector
- One Injector Inlet Fitting
- Two 12AN Unions
- One 20AN Unions
- One 12AN Plugs
- Two 20AN Plugs
2500 HP
- Two Bottles with valves
- Regulator (3 inlet / 3 outlet)
- Two Lockoff Valves
- 1 EPR (dbw) Valve
- 5" Ejector
- Two Ejector Inlet Fittings
- Two 12AN Unions
- Two 20AN Union
- One 12AN Plug
- One 20AN Plug
3000 HP
- Three Bottles with valves
- Regulator (3 inlet / 3 outlet)
- Two Lockoff Valves
- 1 EPR (dbw) Valve
- 5" Ejector
- Three Ejector Inlet Fittings
- Three 12AN Unions
- Two 20AN Unions
- One 20AN Plug
3500 HP
- Three Bottles with valves
- Regulator (3 inlet / 3 outlet)
- Three Lockoff Valve
- Two EPR (dbw) Valve
- 5" Ejector
- Three Ejector Inlet Fittings
- Three 12AN Unions
- Three 20AN Unions
5000+ HP
- Four Bottles with valves
- Two Regulators (3 inlet / 3 outlet)
- Four Lockoff Valves
- Three EPR (dbw) Valves
- 5" Ejector
- Three Injector Inlets Fittings
- Four 12AN Unions
- Four 20AN Unions
- Two 12AN Plugs
- Two 20AN Plugs
Lines and Hoses
We supply the hard parts but all lines and hoses to connect your bottles to the regulator, and the regulator to your ejector will be custom as it all depends where you mount these items in your chassis. You will need to mount all your components, lockoff valves, bottles, regulator, EPR's and then measure for each line. Please budget for these items as the lines and fittings can add quite a bit of cost to the setup.
High pressure lines are Kongsberg 20K psi super high pressure which you can get from The Fitting Source in california. Make sure to allow lead time to get these lines on order. Also, please keep in mind these lines are not super flexible and will have a pretty large radius when you bend them to fit in areas. You can use large sweeping 90 fittings or 45 degree tight fittings but we do not recommend tight 90's as they will hinder flow dramatically.
For your 20AN boost feed lines to the ejector you can use any normal 20AN hose, like redhorse, fragola, etc.
Filling the car with a Compressor and Mother Bottles
We recommend using a compressor that is matched to your system size. For example on a four bottle system we personally run a large 10HP 12-CFM compressor and 3 mother bottles at 4800PSI. We never have an issue with refilling using this setup. If you have a one or two bottle system you could get away with using a 3-5CFM compressor and one mother bottle.
We recommend talking to a used compressor dealer as you can find deals on used compressors from fire stations and scuba equipment dealers. Contact us for more details on that.
Why buy from us?
We race the products we sell, so we know how to support you and do our best to provide you with all the information you need to succeed just like we do. We have experience running these Compressed Air Supercharger systems and tuning them and taking advantage of all the capabilities they provide. These systems are complex and having knowledgable people on your side is going to be of utmost importance. Let us help you achieve your goals with a CAS system tailored to your car and goals.
Specifications
| Horsepower | 1500 HP or 2000 HP or 2500 HP or 3000 HP or 3500 HP or 5000 HP |