Shop | Grannas Racing

Toyota 2JZ Tilton ST246 Billet Clutch and Flywheel Kit $ 1,920.00 1920.0 USD	Tilton 51-1010 ST246 Flywheel for 2JZ engine $ 895.00 895.0 USD	Tilton 95-700 ST246 pressure plate Hardware / Bolt Kit $ 36.66 36.660000000000004 USD	Tilton 69-402UG-36 ST246 Organic Clutch Pack - 26 spline $ 1,032.75 1032.75 USD
Tilton 69-302UG-36 ST246 Cerametallic Clutch Pack - 26 spline $ 1,117.75 1117.75 USD	Nissan 240SX S13 T56 Magnum-F 6-speed manual swap kit (2JZ SWAPPED CARS) $ 499.95 499.95 USD	Nissan 240SX S14 T56 Magnum-F 6-speed manual swap kit (2JZ SWAPPED CARS) $ 499.95 499.95 USD	Honda S2K T56 Magnum-F 6-speed manual swap kit (K20/K24 SWAP) $ 399.95 399.95 USD
Universal Honda K20/K24 T56 Magnum 6-speed manual swap kit $ 9.95 9.950000000000001 USD	Toyota 86 BRZ FRS T56 Magnum-F 6-speed manual swap kit (Honda K20/K24 SWAP) $ 399.95 399.95 USD	Nissan S14 240sx with Mazworx 8.8 IRS Conversion / 1000hp Rated Axle set (uses Z32 wheel hubs) $ 2,299.95 2299.9500000000003 USD	Tilton 69-402UG-57 ST246 Organic Clutch Pack - 24 spline $ 1,215.00 1215.0 USD
Tilton 69-402UG-28 ST246 Organic Clutch Pack - 21 spline $ 1,215.00 1215.0 USD	Tilton 69-402UG-14 ST246 Organic Clutch Pack - 14 spline $ 1,215.00 1215.0 USD	Tilton 69-302UG-57 ST246 Cerametallic Clutch Pack - 24 spline [DO NOT SELL] $ 1,315.00 1315.0 USD	Tilton 69-302UG-28 ST246 Cerametallic Clutch Pack - 21 spline $ 1,315.00 1315.0 USD
Tilton 69-302UG-14 ST246 Cerametallic Clutch Pack - 14 spline $ 1,315.00 1315.0 USD	CD009 Billet steel clutch alignment tool - 24 spline $ 59.95 59.95 USD	Tilton 51-1018 ST246 Flywheel for Nissan RB engines $ 895.00 895.0 USD	Tilton 51-1020 ST246 Flywheel for BMW B58 $ 895.00 895.0 USD

No Flywheel Bolts

ARP Flywheel Bolts

ARP LS Metric (M11) Flywheel Bolts (6)

ARP LS 7/16 (0.875") Flywheel Bolts (6)

ARP Coyote Flywheel Bolts

I already have a release bearing

Tilton Release Bearing for T56 / T56 Magnum

Tilton Release Bearing for V160

Tilton Release Bearing for R154 (weld-it myself - tig welder required)

Tilton Release Bearing for R154 (send in your core R154 front plate)

Tilton Release Bearing for R154 (with brand new R154 front plate)

Tilton Release Bearing for CD009 (mazworx bell only!)

Tilton Release Bearing for TKX

No shift knob

Grannas Leather 6-speed knob

Grannas Black 6-speed ball

Grannas Brushed Aluminum 6-speed ball

TREMEC Black 6-speed ball

TREMEC White 6-speed ball

TREMEC Brushed Aluminum 6-speed ball

TREMEC Polished 6-speed ball

I already have a bellhousing

Grannas Cast Aluminum with hardware kit (street car)

Quicktime SFI-Spec Steel with hardware kit (race/street car)

Tremec LS Cast Aluminum Bellhousing with hardware kit (street car)

Quicktime LS SFI-Spec Steel Bellhousing with hardware (race car)

Mazworx JZVQ Bellhousing

Quicktime SFI Steel Bell for Coyote / SBF

26 (T56)

26 (AR5)

24 (CD009/V160)

21 (R154/W55/W58)

14 (V160 Supra)

18 (GForce/Muncie)

10 (Ford)

Thunderbird/Cobra Case Hardware Kit

Explorer Case Hardware Kit

No Hardware

With Hardware Kit

No Alignment Tool

T56 Billet Alignment Tool (26 spline)

V160 Billet Alignment Tool (14 spline)

CD009 Billet Alignment Tool (24 spline)

FORD T56 Billet Alignment Tool (26 spline)

No index plate

Include bellhousing index plate

I already have a clutch line

Include braided clutch line with fittings

Include 2011-2017 mustang stock line adapter (tilton 6000 bearing)

7/10"

3/4"

13/16"

7/8"

No shift handle

Grannas 4" tapered handle

Grannas 6" tapered handle

I do not need any wiring kit

Wiring Pigtail Kit (standalone engine management cars)

Bluetooth Wiring harness (stock ECU, stock speedometer)

SpeedHut GPS to cable drive conversion + pigtail kit (for cable drive speedometers)

I do not need axles

LEVEL5 Direct Fit (bolt-in)

PRO Level with 5x100 upgraded billet wheel hubs

PRO Level RX8 with billet wheel hubs and billet explorer inner stubs

PRO Level with upgraded billet wheel hubs

PRO Level with 5x114 upgraded billet wheel hubs

Direct Fit Level5 IS300/JZX

DSS 1000HP rated axles with 31 spline outer stubs (uses z32 or q45 hubs)

PRO Level FD3S RX7 with billet wheel hubs

I do not need inner axle stubs

Explorer Case Stubs

Thunderbird/Cobra/MK8 Case Stubs

9" 35 Spline (s-trac LSD)

9" 35 Spline (strange spool)

9" 35 Spline (wavetrac LSD)

No Crossmember Kit Needed

Include Crossmember Fab Kit with Rubber trans mount

Include Crossmember Fab Kit with Prothane poly trans mount

Include only Rubber Transmission Mount

Include only Prothane Poly Transmission Mount

No Driveshaft

Aluminum Magnum-F to OEM rear

Aluminum Magnum-F to Ford 8.8" IRS

Carbon Fiber Magnum-F to OEM rear

Carbon Fiber Magnum-F to Ford 8.8" IRS

Aluminum 2JZ, Magnum-F, 8.8" Rear

Carbon Fiber 2JZ, Magnum-F, 8.8" Rear

Aluminum Honda K-Series, Magnum-F, 8.8" Rear

Carbon Fiber Honda K-Series, Magnum-F, 8.8" Rear

No Driveshaft

Aluminum Magnum-F to OEM rear (non-abs)

Carbon Fiber Magnum-F to OEM rear (non-abs)

No Driveshaft

Aluminum Magnum-F to OEM rear (non-abs)

Carbon Fiber Magnum-F to OEM rear (non-abs)

Aluminum Magnum-F to 350Z diff

Aluminum Magnum-F to 8.8" rear (IRS)

Clear Filters