Shop | Grannas Racing

Honda F-Series S2K T56 Magnum-F 6-speed manual swap kit (F20/F22) $ 399.95 399.95 USD	Honda S2K T56 Magnum-F 6-speed manual swap kit (K20/K24 SWAP) $ 399.95 399.95 USD	Honda S2K T56 Magnum-F 6-speed manual swap kit (2JZ SWAPPED CARS) $ 499.95 499.95 USD	Universal Honda K20/K24 T56 Magnum 6-speed manual swap kit $ 9.95 9.950000000000001 USD
Toyota 86 BRZ FRS T56 Magnum-F 6-speed manual swap kit (Honda K20/K24 SWAP) $ 399.95 399.95 USD	Honda S2000 (AP1) with Grannas Racing T56 Magnum-F 1-Piece 3.5" Aluminum Driveshaft $ 899.95 899.95 USD	Honda S2000(AP2) with Grannas Racing T56 Magnum-F 1PC 3.5" Aluminum Driveshaft 30.75" SL/FL $ 899.95 899.95 USD	Honda S2000 with Grannas Racing T56 Magnum-F and 8.8 Rear 1-Piece 3.5" Aluminum Driveshaft $ 899.95 899.95 USD
Honda S2000 w/Grannas Racing 8.8 Rear-End Conversion Pro-Level Axle/Hub (without inner stubs) $ 2,299.95 2299.9500000000003 USD	Honda S2000 (AP1/AP2) Direct Fit 700hp Rated L/R Axle Set for Grannas Racing 8.8 $ 1,599.95 1599.95 USD	Honda S2000 Aluminum 3.5” Driveshaft AP1 transmission Grannas 8.8 Rear $ 999.95 999.95 USD	Honda S2000 Aluminum 3.5” Driveshaft AP2 transmission Grannas 8.8 Rear $ 999.95 999.95 USD
Tilton 51-2016 ST215 Flywheel for Honda K20/K24 engines $ 895.00 895.0 USD	Tilton 51-2014 ST215 Flywheel for Honda F20/F22 S2000 $ 895.00 895.0 USD	ARP 208-2802 Flywheel bolts Honda B-Series $ 46.99 46.99 USD	Honda F20/F22 T56 Cast Aluminum Bellhousing Kit $ 999.95 999.95 USD
Honda K20/K24 T56 Cast Aluminum Bellhousing Kit $ 999.95 999.95 USD	Quicktime RM-4011 Honda F20/F22 T56 SFI Steel Bellhousing $ 1,699.95 1699.95 USD	Offset Dowels - 14mm - Honda (set of 2) $ 49.95 49.95 USD	Honda S2000 (AP1) with Grannas Racing T56 Magnum-F 1-Piece 3.5" Carbon Fiber Driveshaft $ 1,599.95 1599.95 USD

No Flywheel Bolts

ARP Flywheel Bolts

ARP LS Metric (M11) Flywheel Bolts (6)

ARP LS 7/16 (0.875") Flywheel Bolts (6)

ARP Coyote Flywheel Bolts

I already have a release bearing

Tilton Release Bearing for T56 / T56 Magnum

Tilton Release Bearing for V160

Tilton Release Bearing for R154 (weld-it myself - tig welder required)

Tilton Release Bearing for R154 (send in your core R154 front plate)

Tilton Release Bearing for R154 (with brand new R154 front plate)

Tilton Release Bearing for CD009 (mazworx bell only!)

No shift knob

Grannas Leather 6-speed knob

Grannas Black 6-speed ball

Grannas Brushed Aluminum 6-speed ball

TREMEC Black 6-speed ball

TREMEC White 6-speed ball

TREMEC Brushed Aluminum 6-speed ball

TREMEC Polished 6-speed ball

I already have a bellhousing

Grannas Cast Aluminum with hardware kit (street car)

Quicktime SFI-Spec Steel with hardware kit (race/street car)

Tremec LS Cast Aluminum Bellhousing with hardware kit (street car)

Quicktime LS SFI-Spec Steel Bellhousing with hardware (race car)

Mazworx JZVQ Bellhousing

Quicktime SFI Steel Bell for Coyote / SBF

26 (T56)

26 (AR5)

24 (CD009/V160)

21 (R154)

14 (V160 Supra)

18 (GForce/Muncie)

Thunderbird/Cobra Case Hardware Kit

Explorer Case Hardware Kit

No Hardware

With Hardware Kit

No Alignment Tool

T56 Billet Alignment Tool

V160 Billet Alignment Tool

CD009 Billet Alignment Tool

FORD T56 Billet Alignment Tool

No index plate

Include bellhousing index plate

I already have a clutch line

Include braided clutch line with fittings

LHD (usdm)

RHD (jdm)

7/10"

3/4"

13/16"

7/8"

No shift handle

Grannas 4" tapered handle

Grannas 6" tapered handle

I do not need any wiring kit

Wiring Pigtail Kit (standalone engine management cars)

Bluetooth Wiring harness (stock ECU, stock speedometer)

SpeedHut GPS to cable drive conversion + pigtail kit (for cable drive speedometers)

I do not need axles

LEVEL5 Direct Fit (bolt-in)

PRO Level with 5x100 upgraded billet wheel hubs

PRO Level with upgraded billet wheel hubs

PRO Level with 5x114 upgraded billet wheel hubs

Direct Fit Level5 IS300

DSS 1000HP rated axles with 31 spline outer stubs (uses z32 or q45 hubs)

PRO Level FD3S RX7 with billet wheel hubs

I do not need inner axle stubs

Explorer Case

Thunderbird/Cobra/MK8 Case

9" 35 Spline (s-trac LSD)

9" 35 Spline (strange spool)

9" 35 Spline (wavetrac LSD)

I will provide an Explorer core to Grannas Racing

I will provide a Tbird/Cobra core to Grannas Racing

Grannas to source Explorer case (Junkyard Core)

Grannas to source Tbird case (Junkyard Core)

Grannas Cast Iron (Tbird) with billet main caps. ON BACKORDER UNTIL JUNE 2026

I plan to run the Explorer Case

I plan to run the Thunderbird/Cobra Case

0.004

0.008

0.012

0.016

0.020

0.007

0.014

0.021

No Crossmember Kit Needed

Include Crossmember Fab Kit with Rubber trans mount

Include Crossmember Fab Kit with Prothane poly trans mount

Include only Rubber Transmission Mount

Include only Prothane Poly Transmission Mount

No Driveshaft

Aluminum Magnum-F to OEM rear

Aluminum Magnum-F to Ford 8.8" IRS

Carbon Fiber Magnum-F to OEM rear

Carbon Fiber Magnum-F to Ford 8.8" IRS

Aluminum 2JZ, Magnum-F, 8.8" Rear

Carbon Fiber 2JZ, Magnum-F, 8.8" Rear

Aluminum Honda K-Series, Magnum-F, 8.8" Rear

Carbon Fiber Honda K-Series, Magnum-F, 8.8" Rear

Clear Filters